No More Heavy Lifting: Now you can vacuum from the skirting board! The vacuum cleaner is an optimal complement to the ritter range of built-in products. In addition, with this expansion to our product range, the traditional company remains true to its business philosophy of “made in Germany” without exception. The built-in vacuum cleaner replaces the awkward use of a conventional vacuum cleaner in an efficient way. This appliance is absolutely perfect for everyone who is fed up of having to bend down to sweep dirt together, or who has had enough of dragging around mobile vacuum cleaners. One simply sweeps crumbs and dust in front of it, gives the stainless steel button a short press with one’s foot to activate the suction mechanism, and a few seconds later the dirt has disappeared. With its low design height of 10.5 centimetres, the appliance can be fitted – or retro-fitted – into almost any floor unit. All that is needed for this is a cutout in the baseboard and a normal 230-volt electrical connection.
- Quality product made in Germany
- Quick installation
- High-quality device
- Easy operation
- Practical bags
- Diverse accessories
The drawer-sized built-in device can be installed directly in the one room that collects the most dirt – the kitchen. Crumbs and dust are collected at the front, and the vacuum cleaner is activated at the touch of a stainless-steel button. Thanks to the low design height of 10.5 centimetres, the device can be installed in almost every kitchen, even at a later date.
The built-in vacuum cleaner with stainless steel finish efficiently replaces the cumbersome use of a standard commercial vacuum cleaner, as it is stored in the base of your furniture to save space, and is always ready for use. It saves you from bending down to sweep up dirt, or from hauling around a traditional vacuum cleaner.
The built-in vacuum cleaner can be installed at any time from a skirting board height of 100 mm – even retroactively. The width of the cutout is a minimum of 345 mm. All that is required for installation is a cutout in your skirting board, as well as a 230 Volt power connection. Raising the device slightly is enough to push it in and pull it out.
Rollers are attached to the back of the underside of the built-in vacuum cleaner. These are stored in such a way that the vacuum cleaner can be pulled on its rollers merely through raising it slightly. When it is set down, the suction lip at the front lies flush with the floor. As a result, the built-in vacuum cleaner does not slip, as it is additionally very well-secured due through the opening in the base of your furniture. Thus, there is no additional securing to your furniture necessary.
The vacuum cleaner is activated simply by tapping the stainless steel button with your foot or a brush. The vacuuming process is ended by tapping the stainless steel button once more or automatically after 60 seconds.
The functioning of the built-in vacuum cleaner corresponds to that of a traditional vacuum cleaner in every way, and is equal in every regard. The motor generates a vacuum. The dirt particles are fed into the inside of the casing due to the resulting airflow. Accumulated dirt, up to a maximum size of 12 mm, is swept in front of the suction slot and removed in seconds thanks to the powerful 600 Watt motor.
The dirt is collected in standard commercial Swirl® A07 vacuum cleaner bags, which are anti-allergen certified. To change the vacuum cleaner bag, extract the device and open the suction chamber cover. Now, simply insert a new bag with one easy click. To this end, the full bag is removed from the opening of the device and a new bag inserted. Afterwards, the suction chamber cover is closed once more, and the built-in vacuum cleaner pushed back into the base of the furniture.
The built-in vacuum cleaner may only be cleaned with a dry or slightly damp cloth.
Optionally, a suction hose with plug-in nozzle and two attachments (a brush attachment and a crevice nozzle) are available. Through use of the crevice nozzle, the built-in vacuum cleaner is well-suited for the cleaning of hard-to-reach places such as drawers. To this end, the plug-in nozzle is placed in the suction slot of the built-in vacuum cleaner. The hose, with a length of 3 m and a diameter of 27 mm, is attached to the plug-in nozzle, and the corresponding attachment then attached to the hose. With the clever brush attachment, you can vacuum even work surfaces and floor corners in no time at all.
solutions 2020 - Built-in vacuum cleaner SES 10
Every year at the ambiente in Frankfurt, a special presentation called Solutions takes place. There, Sebastian Bergne, a renowned London industrial designer, presents select, particularly useful and carefully considered products from the kitchen and household sector. 2020, the ritter built-in vacuum cleaner BVC 10 has made it into the selection of Solutions.
Our built-in devices can of course be combined with each other. If the installation requirements are fulfilled or the space in the kitchen is available, there are almost no limits when it comes to combining our built-in appliances. Here is an example of a combination with the built-in vacuum cleaner
Built-in food slicer AES 62 SL + Built-in vacuum cleaner SES 10 with optional accessory.
Practical built-in combination which keeps the drawer clean.
Do you have questions about our built-in vacuum cleaners? We will be pleased to answer them for you here in advance. If you are unable to find a satisfactory or complete answer to your question, please do not hesitate to contact us.
Requirements for the installation of the built-in vacuum cleaner
The SES 10 built-in vacuum cleaner can be installed in the base section of a fixed piece of furniture from a base height of 10 cm. Please follow the operating instructions enclosed with the device and the installation requirements of a clear installation width > 345 mm.
Can the built-in vacuum cleaner be installed in any kitchen?
Yes, the built-in vacuum cleaner can be installed in any kitchen, provided that the installation requirements are met.
I would like to install the built-in vacuum cleaner in a room/furniture other than the kitchen. Is that possible?
Yes, the built-in vacuum cleaner can be installed in the base section of any fixed piece of furniture and any room/furniture, provided that the installation requirements are met.
Can the built-in vacuum cleaner also be installed in an existing kitchen?
Yes, it is also possible to install the built-in vacuum cleaner at a later date.
How do you access the vacuum cleaner bag when it needs to be changed?
To change the vacuum cleaner bag, pull the appliance out of the base section of the furniture and open the suction chamber flap. You can now change the bag with a simple click.
Where can I buy vacuum cleaner bags for the built-in vacuum cleaner?
The commercially available Swirl® Vacuum Cleaner Bags A07 for the built-in vacuum cleaner are available from the ritter online shop or in retail outlets.
I have pets / a robot vacuum cleaner. What if they activate the built-in vacuum cleaner in my absence? Will it run for hours then?
No, the built-in vacuum cleaner comes with specialist software, and switches off automatically after approx. 60 seconds.
Can the built-in vacuum cleaner also clear away bigger pieces of dirt (e.g. coffee beans etc.), or just dust and crumbs?
The built-in vacuum cleaner can clear away all dirt that has a maximum size of 12 mm within seconds.